Store besparelser
Hurtig levering
Gemte
Log ind
0
Kurv
Bøger
Bestsellers
Kommer snart
Nyheder
Spil og hobby
Kurv
  1. Bog
  2. Hobby
  3. Modeljernbaner

3D Printing and Laser Cutting: A Railway Modelling Companion

Af: Jeff Geary Engelsk Hardback

3D Printing and Laser Cutting: A Railway Modelling Companion

Af: Jeff Geary Engelsk Hardback
Tjek vores konkurrenters priser
The technology for 3D printing has been around for many years but only recently have 3D printing machines become affordable for individuals or modelling societies. This has led to a rapidly expanding market among hobbyists and home users, offering the opportunity to design and build bespoke models of all kinds. This book provides an introduction to the subject with special emphasis on model railways.The authors take readers through the principles of 3D drawing and a review of some of the 3D software packages available free of charge on the internet. A series of step-by-step instructions then guide the reader through the construction of lineside structures, rolling stock and locomotives. A section on the technology of 3D printing and practical advice on using a 3D printer follows, highlighting the pitfalls and how to avoid them. The final section introduces laser cutting and etching/engraving for the modeller, again with step-by-step examples.The book is illustrated with over 300 colour pictures and diagrams, showing the reader in detail how to master the techniques needed to create excellent 3D models.
Vis mere
Tjek vores konkurrenters priser
Normalpris
kr 264
Fragt: 39 kr
6 - 8 hverdage
20 kr
Pakkegebyr
God 4 anmeldelser på
Tjek vores konkurrenters priser
The technology for 3D printing has been around for many years but only recently have 3D printing machines become affordable for individuals or modelling societies. This has led to a rapidly expanding market among hobbyists and home users, offering the opportunity to design and build bespoke models of all kinds. This book provides an introduction to the subject with special emphasis on model railways.The authors take readers through the principles of 3D drawing and a review of some of the 3D software packages available free of charge on the internet. A series of step-by-step instructions then guide the reader through the construction of lineside structures, rolling stock and locomotives. A section on the technology of 3D printing and practical advice on using a 3D printer follows, highlighting the pitfalls and how to avoid them. The final section introduces laser cutting and etching/engraving for the modeller, again with step-by-step examples.The book is illustrated with over 300 colour pictures and diagrams, showing the reader in detail how to master the techniques needed to create excellent 3D models.
Vis mere
Se mere i:
Produktdetaljer
Sprog: Engelsk
Sider: 160
ISBN-13: 9780711038417
Indbinding: Hardback
Udgave:
ISBN-10: 0711038414
Kategori: Modeljernbaner
Udg. Dato: 22 sep 2016
Længde: 16mm
Bredde: 274mm
Højde: 203mm
Forlag: Crecy Publishing
Oplagsdato: 22 sep 2016
Forfatter(e): Jeff Geary
Forfatter(e) Jeff Geary

Kategori Modeljernbaner

ISBN-13 9780711038417

Sprog Engelsk

Indbinding Hardback

Sider 160

Udgave

Længde 16mm

Bredde 274mm

Højde 203mm

Udg. Dato 22 sep 2016

Oplagsdato 22 sep 2016

Forlag Crecy Publishing